Differences and Application Recommendations for EDTA-Fe and EDDHA-Fe
In agricultural production, iron deficiency does not necessarily mean that there is no iron in the soil. In many cases, iron becomes unavailable to plants due to factors such as soil pH and carbonates, making it difficult for crops to absorb and utilize. Compared with conventional iron salts, chelated iron protects iron through chelation, improving its stability and availability under specific conditions. EDTA-Fe and EDDHA-Fe are both commonly used iron chelates, but the key difference is not which one is better, but where each is best suited.
I. EDTA-Fe: More Suitable for Foliar Application and Acidic to Neutral Conditions
![]() |
![]() |
EDTA has a strong chelating ability for iron and typically provides good water solubility, making EDTA-Fe suitable for foliar application, fertigation, and soil application under acidic to near-neutral conditions. Its advantages include relatively high iron content, lower cost, and flexible application. However, EDTA-Fe is more sensitive to soil pH. As pH increases, its ability to keep iron in a stable chelated form decreases significantly. In alkaline and calcareous soils, relying solely on EDTA-Fe for soil iron supplementation may therefore not provide ideal results.
Therefore, EDTA-Fe is generally recommended for foliar application, acidic/neutral soils, fertigation, hydroponics, and protected cultivation. In particular, for foliar iron supplementation, EDTA is a commonly used chelating system for micronutrients and offers good application convenience.
II. EDDHA-Fe: An Iron Supplementation Solution for Alkaline Soils
![]() |
![]() |
Iron chelates formed with EDDHA have stronger stability under high-pH conditions, particularly the o,o-EDDHA isomer, which can maintain iron availability under relatively high soil pH conditions. Therefore, EDDHA-Fe is generally more suitable than EDTA-Fe for soil iron supplementation in alkaline, calcareous, and high-pH soils.
This is why EDDHA-Fe is often an important choice for soil and fertigation iron supplementation in crops such as citrus, grapes, fruit trees, and olives, which are prone to iron-deficiency chlorosis under high-pH conditions. Studies have also shown that under alkaline and calcareous soil conditions, Fe-EDDHA maintains soluble iron in the soil solution significantly better than Fe-EDTA. In simple terms, EDTA-Fe focuses on flexibility and cost-effectiveness, while EDDHA-Fe focuses on stability and iron availability under high-pH conditions.
III. How to Choose Between EDTA-Fe and EDDHA-Fe?
|
Comparison |
EDTA-Fe |
EDDHA-Fe |
|
Iron Content |
Approx. 13% Fe |
Approx. 6% Fe |
|
Chelation Stability |
Moderate |
Higher |
|
Suitable Conditions |
Acidic to near-neutral |
Neutral to alkaline, especially high-pH conditions |
|
Foliar Application |
Recommended |
Generally not the first choice |
|
Fertigation |
Recommended |
Recommended |
|
Soil Application |
Acidic/neutral soils |
Alkaline/calcareous soils |
|
Key Advantage |
Higher iron content, flexible and economical |
Maintains iron availability under high-pH conditions |
When making a practical choice, do not focus only on the iron content of the product. For example, commonly used EDTA-Fe products may contain approximately 13% Fe, while EDDHA-Fe typically contains around 6% total Fe. However, EDDHA-Fe has significantly stronger stability in high-pH soils. Therefore, soil pH and application method should be considered first, followed by iron content and cost.
IV. Frequently Asked Questions
- Why is EDDHA-Fe more recommended for high-pH soils?
Answer: As soil pH increases, iron and some iron chelates can gradually convert into less soluble forms, reducing iron availability to plants. EDDHA has stronger chelation stability with Fe, allowing it to maintain iron in an available form more effectively under high-pH conditions.
- Can EDDHA-Fe only be used in alkaline soils?
Answer: No. EDDHA-Fe can also be used under other pH conditions, but its advantages are particularly significant in high-pH and calcareous soils. Under acidic or neutral conditions, if EDTA-Fe can already meet the crop's requirements, EDTA-Fe is generally a more cost-effective option.

Free amino acids and peptides
Fulvic acid derived from corn stalks
Seaweed Series
Organmix
DiamondMax NO.1
DiamondMax NO.2
DiamondMax NO.3
Ultra Fulvic
Max UniqueHumate100
Ultra HumiMax
ULTRA HUMIMAX DF
Ultra HumiMax WSG
Max HumiBuild
Max Black Pearl
SeaMax
Max Seasailer
Max AminoN 16
Ultra AminoMax
Max AminoAcid 50
Max PlantAmino50
Max Plant AminoTE
AminoMix
FulvoMax
Max FulvicK
ULTRAMINO
Max Amino N8
ULTRALGAE Plus
ULTRALGAE Ca+Mg
HumiCare-Balanced type
HumiCare-Root Promoting type
HumiCare-Crop Growth promoting Type
HumiCare-Fruit Coloring and Swelling Type
AminoMax-Anti-cracking
AminoMax-Color Brighter&Taste Sweeter
AminoMax-Flower and Fruit Promotion
Ultra Fulvic LQ
AMINTEX
Max Aminomix LQ
GROWMAX-Fe6
GROWMAX-Mg
GROWMAX-Ca
GROWMAX-Cu
GROWMAX-Fe
GROWMAX-MIX
GROWMAX-Mn
GROWMAX-Zn
MAXGREEN 13-8-34+TE
MAXGREEN 20-20-20+TE
MAXGREEN 10-52-10+TE
MAXGREEN 32-9-10+TE
Nutrition Way18-18-18+TE
TriBioMax Bloom
TriBioMax Root
TriBioMax Swift
BioFusion Power
BioFusion Prime
Glycine
L-Proline
L-Tryptophan
L-Glutamic
Glycine Betaine
Chitosan Oligosaccharide(liquid)
5-AMINOLEVULINIC ACID (5-ALA)
Alginate oligosaccharide(powder)
Alginate oligosaccharide(liquid)
Chitosan Oligosaccharide(powder)













